Let's take a look at the acrylic manufacturers produced in Zhejiang

As an acrylic manufacturer in Zhejiang, we would like to take you to learn about our product.

The production process is complicated, and thermoforming is the process of making plexiglass plates or sheets into products of various sizes. The blanks cut to the required size are clamped on the mold frame, heated to soften, and then pressurized to make It sticks to the mould surface to obtain the same shape as the mould surface. After cooling and shaping, the edge is trimmed to obtain the product. The pressurization can be done by vacuum drawing or directly pressurizing the convex mold with the profile. The thermoforming temperature can refer to the temperature range recommended in Table 3. When selecting rapid vacuum low-draft molding products, the temperature should be close to the lower limit temperature, and the deep drawing products with messy shapes should be close to the upper limit temperature. Normally, the normal temperature should be selected.

The main purpose

PMMA is a polymer obtained by the polymerization of acrylic acid and its esters, collectively referred to as acrylic resin, and the corresponding plastic is collectively referred to as polyacrylic plastic. Among them, polymethyl methacrylate is the most widely used. The abbreviation code of polymethyl methacrylate is PMMA, commonly known as plexiglass, and it is the most excellent composition of the transparent material so far.

PMMA has the advantages of light weight, low price, and easy molding. Its molding methods include casting, injection molding, machining, thermoforming, etc. Especially for injection molding, it can be mass produced, the manufacturing process is simple, and the cost is low. Therefore, its use is becoming more and more widespread, and it is widely used in various fields.

Application areas: hotels, shopping malls, office buildings, clubs, villas, museums, medical care, education, catering, exhibitions, etc.

Application areas: suspended ceilings, integrated ceilings, partitions, screens, sliding doors, transparent walls, hotel furniture, office furniture, bar counters, lighting, chandeliers, signs, signs, floors, landscapes, etc.